Tuesday, April 28, 2020

From Curt: Siege of Malta, 1565 - Barbary Corsair Spearmen and a Archer Command Stand


Switching tack from the Grim Dark Future to the sun-kissed Middle Sea, I thought I'd finish off a few more figures for my 1565 Malta project which have been sitting half done since the winter Challenge.



Here are half a dozen spearmen to add to Turgut Reis' slowly growing contingent of fierce Barbary corsairs.



These are from Footsore Miniatures' excellent Caliphate range. Similar to my other efforts, I've had fun using a lot of colour with these guys. I may get another pack later to bulk-up the unit, but this group will stand as a good start.


The full unit of spearmen.
I also did up a command stand for one of my corsair archer units which was bereft of one. 



The piper and standard bearer are from Brigade Games, while the leader is a Footsore model. I did a small modification to have him holding a crossbow along with a small targe, just to make him a little more distinct from his bow-armed comrades. 

The archers with their new leader.
At first I just had the three figures on the base, but for a bit of additional colour, I decided to give them a banner as well (I figure you can't have enough flags on the tabletop).


These 9 models will give me another 45 points, for a grand total of 135.

Thanks for popping in for a visit!

-Curt


From MattT: A couple of salty types, VBCW

As i have based my militia in Humberside i wanted to inject a bit more of the sea into my militia. Searching around i found the Pulp Figures, savage seas range. Although a lot of the range is a bit too tropical, some of the figures will fit right in representing merchant navy and local fishermen.


 I have now managed to muster enough to represent HQ section and  2 x 12 man sections.

Stay Safe, Matt

KenR - 28mm Italian Wars Artillery


A quick addition to the things that go boom in my Italian Wars Army. I found this gun and crew already undercoated in a box under a box in a cupboard I hadn't looked in for a while ! Heaven knows how much stuff is hidden around the Home of Yarkshire Gamer 😁

Thirsty Work !
The figures are from Wargames Foundry who do a few different gun and crew packs, they are old casts but like the Gendarme they very much stand up to today's more modern sculpts.


A quick 30 points taking me to 734 so far in Q Challenge, got some more Cops to post tomorrow.


From SimonG: More HYW Knights with a Herb Twist

While this one took a bit longer than anticipated - maybe I'm getting a bit ambitious in what I'm trying to take on now, it'll be good when I can switch on to masses of single colour English archers!



Anyway this stand (again in Impetus basing) is for Teodoro da Valperga and his companions. de Valperga was an Italian independent Captain who was present at Orleans and Patay. Most interesting is his coat of arms which comprises a hemp plant!




The knights are all Perry plastics as are three of the horses. The last horses (with the caparison) is from Front Rank.






I'm quite pleased with how these came out including the Croix de Lorraine on the guy in Blue and experimenting with an edging pen to outline details like the white cross on the guy in red.

One more stand of French knights to go but before then I have a couple of stands of billmen to complete and with that and a couple of stands of men at arms my French army will be finished.

From SanderS: More Rebel Scum! (21points)

Hoi There,

In the continued quest to finish all the Rebel figures for Star Wars Legion in the commission, I have now come to some Rebel Specialists. An Intelligence officer (his pips state he's a Commander) as well as two droids: a medical one and a R2 unit.


The Intelligence officer 



The droids:





I really liked looking for a scheme for the R2 unit that wasn't main stream "white with a contrast colour" and luckily my client liked it too. The Medical Droid is just his boring old self modelled on the one in Empire. They do look like they are dancing "The Robot" don't they?

Cheers Sander

Monday, April 27, 2020

From GregB: Warhound Titans for Adeptus Titanicus

New Warhound titans from GW's Adeptus Titanicus - spare weapon options seen at the feet of the bases.
Some more machines for GW's "Adeptus Titanicus" - these are Warhound-class titans, multi-part plastic kits from GW. Each side of the Horus Heresy gets a new machine here - the grey and yellow titan serves with the loyalists of Legio Gryphonicus, while 30k geeks will probably already be familiar with the purple and red colours of Legio Mortis, who fight for the cause of the Warmaster.

Legio Mortis engine sporting twin plasma blast guns - these weapons are hard on the Warhound's reactor, but also very deadly to an enemy engine that has lost its void shields.
A mixed weapon load...mega bolter on the left "arm", and a laser blaster on the right "arm".
Twin flame cannons...probably an ineffective weapon loadout, but in the Horus Heresy there are some problems which can only be solved with lots and lots of fire...
The Warhound is the "smallest" of the battle titans that serve in the ranks of the Titan Legions of the Horus Heresy. They are sometimes called "scout titans", which is conceptually hilarious, but these machines are (relatively) lighter and faster than the other city-crushing titans. They can maneuver more deftly, and while their weapons are (again, relatively) "lighter" than those carried by the Reavers and Warlords, they are still dangerous - the Warhound is a real threat to enemy machines, even the larger chassis.

Legio Gryphonicus Warhound.
Warhounds are particularly dangerous in groups, and they can cooperate in pairs and groups of three machines, sharing their void shields and joining their firing together to cause serious damage to their enemies. I already had two Warhounds for each Legio in my collection, but a third Warhound for each side will help the "pack" reach a nice critical mass.

Twin mega bolters...this weapon variant is very, very dangerous to enemy void shields, although the weapons cannot do much damage once the shields are down. That's where the "pack" part come into play...
There is one special thing about these models that is a different from the Warhound models I built previously - I managed to magnetize the weapon mounts on these! My gaming friends, Curt included, are very smart with their use of magnets, but I am so clumsy with them. Magnets are an old hobby foe of mine, and efforts involving magnets often end in frustration and swearing. Some of the new Adeptus Titanicus models from GW are designed specifically to accommodate small magnets, and I usually manage OK with those. The Reaver and Warhound kits, however, were not designed specifically to use the magnets, so you either had to glue the weapons on, or come up with your own solution.

Here is a photo with the loyalist machine sporting the flame cannons.
I glued the weapons into place on my previous models, but Curt and others have shown that, with some clever modifications, the magnets can be used on models like these. I copied their approach, and I managed to get the little magnets to work!

This is great as these machines now have different weapons options - this is great for the players, as choosing weapons in a big part of the fun for the game. As you would expect, different weapon load outs offer different choices in tactics - for example, a Warhound equipped with "mega bolters" (i.e. huge, heavy calibre machineguns) on both weapon mounts will be very useful for bringing down enemy void shields. Or, perhaps a player will prefer to mount twin plasma cannons...not so great at shields, but more than able to deliver a killing blow once the shields of an enemy are down...

Magnets are also the only way I would ever bother with the giant flamethrowers - I'm not sure what value these weapons would really have in a game of "Adeptus Titanicus" - as opposed to a game of "Epic", where they could obliterate entire infantry companies in one pass - but thanks to the magnets, the players can choose to use them or not.

The newly expanded Warhound pack on the shelf with the rest of my loyalist collection...
The expanded Warhound pack of Legio Mortis...
I didn't have quite enough spare weapons to cover every possibility for both sides...the Legio Mortis side is short a laser blaster and a mega bolter, something I'll look into later. For now, it's great to have these new machines joining the ranks. Now if we could just get a game in somehow...

Thanks for reading, and stay safe out there!

GregB

AdamC: USS President and Corsair Xebec

Two very different ships on offer today.  The USS President and a yet unnamed Xebec.
 The USS President was a sister ship of the USS Constitution there were some differences in construction and armament.  The President was more heavily armed with 42-pounder carronades compared to Constitution’s 32-pounders.   
President side by side with Boston
President was the Flagship of commodore John Rogers in 1812 and 1813 and cruised extensively against British shipping often in company with other US war ships.  Rogers was unlucky and never had a shot at a English ship or squadron of equal force so his real contributions the American cause are over shadowed by the flashy single ship actions of other ships.  In 1814 President Switched commanders to Captain Steven Decatur and was captured by the British while trying to break the blockade. 
The details of the figurehead were a little hard to make out but I determined it was supposed to be George Washington in is Continental Army uniform which I did my best to recreate. 
 The Stern details are great lots of good "ginger bread" from the ships name to an American eagle and shield. 
 Next up a kit bashed Xebec.  I got another 6 brigs with the American Fleet set and more brigs are about the last ship type I need (I have 10).  So after waiting for Guy Bowers to share how he was going to make his Xebec.  I decided I would proceed on my own.  As a side note here are a pair of Islands I carved from packing foam. 
The hull is made from parts of two brigs.  The masts are part of left-over plastic spear parts.  The foremast should be leaning forward.  opted to have the fore and main masts with their lateen sail spreading to different sides because it looked cool (like a pair of wings) and I found several images with sails in this orientations.  The Sails are paper form my daughter’s art pad it took some trial and error, but they came out good in the end.  I sort of regret the bit of cloth I tried to make into a furled sail, but it doesn’t look too bad I suppose. 
I created a pop deck with some left-over bits including railings made from 15mm tank tracks (anyone spot that?) The paint job is of my own invention.  Green is a color that appears on several Muslim flags, so it seemed a likely choice for a warship.  I think the Xebec came together nicely and I hope to compare construction notes with Guy when he gets his finished.  Now I just need some good  Corsair ship names.